MIL-V-62475(AT)
TABLE IV. TSCD operator error messages - Continued.
Display |
Cause |
NSG NOT RDY TOO MANY TRIG SHORT ? V EASTINGS ? V NORTHING ? V ALTITUDE ? T EASTINGS ? T NORTHING ? T ALTITUDE NO VALD TE/N NO VALD VE/N |
A polar data request or a realign NSG command was attempted before the NSG was in the Directional-Gyro mode. Number entered had too many digits. Trigger switch in hand control is activated (depressed or electrically shorted) during power-up. No vehicle eastings value entered. No vehicle northing value entered. No vehicle altitude value entered. No target eastings value entered. No target northing value entered. No target altitude value entered. No valid target eastings/northing data. No valid vehicle eastings/northing data. |
3.5.21.4 Lamp test. The LAMP TEST/BRT (lamp test/brightness) key shall provide a menu to examine and change the lamp brightness value, and to perform a lamp test. The power-up value for lamp brightness shall be 9 (full brightness). By entering in numbers between
0 (minimum brightness) and 9, the brightness shall be varied. The lamp test shall test the alphanumeric display by lighting each dot in each character, in groups of four characters, at a rate of one second per group. After testing the display, all status lamps and the trigger lamp on the hand control shall illuminate for three seconds (see 4.6.4.20.4).
3.5.21.5 G/VLLD reticle brightness (GLLD RET BRT) key. The GLLD RET BRT key
shall provide a menu to enter and examine the G/VLLD reticle brightness value. A brightness of zero shall set the reticle brightness to the same level as a minimum value of one, but shall cause the numeric display in the G/VLLD optics to be turned off except when the laser is fired. Maximum brightness shall be nine and the power-up brightness value shall be one
(see 4.6.4.20.5).
3.5.22 Digital message device (DMD). The FISTV vehicle shall have provisions for accepting either the single channel AN/PSG-2A DMD or the four channel AN/PSG-5 FIST DMD, along with the DMD mount (see 4.6.4.21).
15
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business