MIL-DTL-62267B(AT)
4.5.4.21.1.2 Circuit voltage test. To determine conformance to 3.4.21.1.2, arm the
circuit and verify that the power-on (ready) lamp is illuminated. Actuate the RIGHT firing
pushbutton and verify that the voltage on the smoke grenade discharger pins is as specified.
Actuate the LEFT firing pushbutton and verify that the voltage on the smoke grenade discharger
pins is as specified. Return power-on (ready) switch to OFF and verify that voltage is not present
on any of the firing pins.
4.5.4.22 Vibration and noise level test. To determine conformance to 3.4.22, the average
of three noise level readings at each octave band shall be determined at each operator's head
position under normal operating procedures. Verify that the noise hazard signs are clearly visible
to personnel in all crew stations.
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified
in the contract or order (see 6.2). When actual packaging of materiel is to be performed by DoD
personnel, these personnel need to contact the responsible packaging activity to ascertain requisite
packaging requirements. Packaging requirements are maintained by the Inventory Control Point's
packaging activity within the Military Department or Defense Agency, or within the Military
Department's System Command. Packaging data retrieval is available from the managing Military
Department's or Defense Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature which may be
helpful, but is not mandatory.)
6.1 Intended use. The tank chassis is intended for use as a transporting launcher for an
AVL bridge after subsequent adaptation of the launching and bridge mechanism to the chassis.
These tank chassis' are considered military unique due to the specific nature of their design for
battlefield conditions.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a. Title, number, and date of this specification.
b. Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of
individual documents referenced (see 2.2.1 and 2.3).
c. When first article is required (see 3.1).
d. Painting, if other than specified (see 3.9.1).
e. If preproduction inspection is required (see 4.2.1).
18
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business