INCH-POUND
MIL-DTL-62267B(AT)
4 September 1998
SUPERSEDING
MIL-PRF-62267A(AT)
27 January 1997
DETAIL SPECIFICATION
CHASSIS, TANK: ARMORED VEHICLE,
BRIDGE LAUNCHER, M60Al
This specification is approved for use by the U.S. Army Tank-automotive and
Armaments Command, Department of the Army, and is available for use by all
Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification covers one type of full-tracked tank chassis which with
subsequent adaption mounts a 60 foot (ft) (18 meter (m)) launched bridge. This specification is
limited to the vehicular chassis of the launcher.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirement documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may
be of use in improving this document should be addressed to: U.S. Army Tank-automotive and
Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document, or by letter.
AMSC N/A
FSC 2350
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business