MIL-PRF-62195D(AT)
b. When wiring is suited for the AN-VVS-2(V) - type Passive Night Viewer, the
voltage output at the night viewer connector shall be essentially equivalent to
battery output voltage.
3.3.11.5 Generator blower motor. The generator blower motor shall be capable of
maintaining a constant flow of air through generator.
3.3.11.6 Engine manifold heater. Operation of the push-button switch on the purge pump
handle shall ignite fuel supplied to heat the manifold.
3.3.11.7 Lights. Lights, consisting of normal head and taillights, blackout head and
taillights, and all interior lights, shall operate satisfactorily and all electrical contacts and
connections shall maintain positive contact under all vehicle operating conditions.
3.3.12 Seating. All sliding parts and operating contact surfaces shall be free of paint.
3.3.12.1 Mechanic's and driver's seats. The seats shall freely move forward, backward,
vertically, and dump when the appropriate levers are actuated. With driver or mechanic seat
occupied, the force required to actuate the fore and aft seat adjustment lever shall not be more
than 12 lb at the end of lever. With the seat vacated, the force required to actuate the seat vertical
adjustment lever shall not be more that 14 lb at the end of the lever. The force required to trip the
seat dumping lever shall not be more than 14 lb at the end of the lever.
3.3.12.2 Commander's seat. The seat shall move fore and aft, tilt and rotate 360 degrees
(°) without binding or interference when appropriate levers are actuated. The seat shall lock
securely in the vertical position and, when dump lever is actuated, shall be capable of dumping to
horizontal position and lock securely. With seat occupied and height lever actuated the seat shall
raise no less than 9 in. with spring force as weight is removed from seat. CAUTION: Do not
actuate height lever without sitting on seat.
3.3.12.3 Rigger's seat. The seat shall move fore and aft, tilt and rotate 360° without
binding or interference when appropriate levers are actuated. With seat occupied and height lever
actuated, the seat shall raise not less than 9 in. with spring force as weight is removed from seat.
CAUTION: Do not actuate height lever without sitting on seat.
3.3.13 Grades and slopes. Vehicle shall operate on longitudinal grades and side slopes.
3.3.14 Trench crossing. The vehicle shall cross trenches in a forward direction without
stalling or damage to suspension, boom, and fenders.
6
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business