MIL-DTL-45360H(AT)
3. REQUIREMENTS
3.1 Level A.
3.1.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2. Approval of this vehicle shall not relieve the contractor of his
obligation to process all vehicles in accordance with this specification. Unless otherwise specified
by the acquisition activity, any change to materials or design after approval shall require additional
vehicles be inspected as specified in 4.2. The Government representative shall select the vehicle
to be inspected.
3.1.2 Government furnished equipment (GFE). Unless previously accomplished, GFE
(other than installed) shall be packaged, packed, and marked in accordance with the individual
document for the specific item. GFE shall be stowed with basic issue items (BII).
3.1.3 Preservatives and atomized spray equipment. When atomized spraying of
preservative oils is specified, compressed air supply lines shall be equipped with moisture
separators every 50 feet or fraction thereof.
3.1.4 Processing records. Records of vehicle processing shall be maintained and shall be
readily available for review by Government representatives.
3.1.5 Disassembly. Projecting parts whose removal will accomplish desired cube
reduction and parts susceptible to damaged and pilferage shall be removed from the vehicle.
Removed bolts, nuts, screws, pins and washers shall be placed in one of the mating parts and
secured. Bare metal surfaces of removed parts shall be preserved, packaged, packed in
accordance with MIL-STD-2073-1, identified and stowed securely with the vehicle.
3.1.5.1 Matchmarking. Parts removed from the vehicle shall be matchmarked when
necessary to facilitate reassembly. Matchmarking information shall be put on cloth shipping tags
conforming to Type A of UU-T-81, or on metal tags using waterproofed ink or paint, and
attached to mating parts. The marked cloth shipping tags shall be waterproofed with varnish
conforming to TT-V-121 or adhesive conforming to MMM-A-179.
3.1.6 Record forms. Two copies of DA Form 2258 shall be completed with information
that includes preservation accomplished and depreservation instructions. The Equipment Log
Book Binder and one copy of DA Form 2258 (see 6.4) shall be placed in a bag conforming to
Type I, Class B, Style 2, 6 mil of MIL-B-117; the bag shall be closed by heat sealing and securely
attached in the driver's compartment of vehicle. The other copy of DA Form 2258 shall be
waterproofed with adhesive conforming to MMM-A-179, or sealed in a plastic bag, and securely
attached in a conspicuous location on the exterior of the vehicle.
7
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business