MIL-H-62185(AT)
3.6.15 Mount. The gun mount shall conform to MIL-M-45212.
3.7 Radio suppression. Complete vehicle shall be radio interference suppressed in
accordance with tactical vehicle requirements of MIL-STD-461.
3.8 Painting, marking and data plates.
3.8.1 Painting. Unless otherwise specified, the exterior and interior of cab and hull,
components, assemblies, sub-assemblies, and parts that require painting shall be prepared and
painted in accordance with applicable drawings and MIL-STD-193. Vehicle exterior paint and
nonskid paint shall match color chip X24087 (olive drab) of FEDERAL STD NO. 595.
3.8.2 Marking. Marking shall be as specified by FRG.
3.8.3 Name, shipping, and service data plates. Data plates shall be photographic aluminum
plate (sensitized). The plates shall have the photosensitive silver compounds imbedded within the
oxide layer; and after photographic processing, the letters, numbers and all other characters shall
be sealed in the oxide layer by suitable chemical treatment of the layer. The plates shall have a
black background, with white letters and letter blanks, except that caution and warning plates
shall have red letters and letter blanks. The size of the plate, type and size of lettering, and the
information to be included shall be in accordance with applicable drawings or as specified by the
procuring activity. Thickness of the plates shall be .030 inch minimum. The plates shall meet the
performance requirements of MIL-P-514.
3.9 Fire extinguishers.
3.9.1 Fixed. The fixed fire extinguisher system, when installed in accordance with applicable
drawings, shall be readily accessible for servicing and operation internally and externally. In
ambient air temperatures of 72°F, the maximum effort required to discharge the system, either
internally or externally, shall be not more than 55 pounds.
3.9.2 Portable. The portable fire extinguisher, when installed in accordance with applicable
drawings, shall be readily accessible for servicing and use.
4. QUALITY ASSURANCE PROVISIONS
4.1 Responsibility for inspection. Unless otherwise specified in the contract or purchase
order, the supplier is responsible for the performance of all inspection requirements as specified
herein. Except as otherwise specified, the supplier may utilize his own facilities or any
commercial laboratory acceptable to the Government. The Government reserves the right to
perform any of the inspections set forth in the specification where such inspections are deemed
necessary to assure supplies and services conform to prescribed requirements.
11
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business